Klienditeenindus +372 5692 9000

Swaging range we can offer is 1,6 - 8mm (1/16" 5/16")

AISI 316 wires press sleeves swage terminals swaging
1 x 19 (hard) 7 x 19 (flexible)
2 mm 1.10 €/m 1.10 €/m 0.50 € 5 €
2,5 mm 1.40 €/m 1.40 €/m 0.80 € 6.00 € 5 €
3 mm 1.90 €/m 1.90 €/m 1.50 € 6.50 € 5 €
4 mm 2.50 €/m 2.50 €/m 2.00 € 7.50 € 5 €
5 mm 4.00 €/m 4.00 €/m 3.00 € 9.00 € 8 €
6 mm 5.60 €/m 5.60 €/m 12.00 € 8 €
7 mm 7.90 €/m 7.90 €/m 21.00 € 10 €
8 mm 10 €
PVC covered 7x7 wire + 2mm cover. 3.10 €/m

Portable Roller Swagers

The yacht market was where Wireteknik began. A machine that did away with convention. All previous concepts of fitting terminals onto full-steel wire rope and solid rod were turned upside down. Further, the terminal was also straight, not curved as was usual hitherto.

The principle is simple. The terminal itself drives the roller dies. The machine works with a freely rotating pair of rollers, driven when the terminal is drawn between them. It is a simple and robust design with the minimum of movable parts, making it reliable both in the field and in rational production.

Typical applications:

  • Standing rigging and lifelines for sailboats. The Swedish Navy uses it for making railing.
  • Architectural, like balustrades and railing.
  • Scenographic use at theaters for hanging and supporting set pieces.
  • Extensively used for on-site swaging of wire fall protection systems on roofs and buildings.
  • Structural rigging for hang gliders and ultra-light airplanes.
  • Anchoring of weather balloons.
  • Oceanographers uses it for swaging winch wire ropes for their surveying instruments.
  • Lifting strops for fuel rods at nuclear power plants.
  • Structural rigging for sail-roofs and sail-shades.

Electricity, Air or Manpower

A big advantage with Wireteknik swagers is their portability. One man can do the job, whether he uses a manual pump, an electric motor or compressed air. Due to the portability, a permanent on site solution can be achieved in all circumstances. The range is wide, and the capacity is from 1,6 mm – 40 mm, wire or rod.

LLOYD’S Certificate

Evidence of the strength and reliability of our
technique is the approval from Lloyd’s Register of Shipping.

Wireteknik customers

Among the companies placing their confidence in us are Atlas Copco, Alfa Laval, British Rail, NATO, Seldén Mast AB, Spine Robotic, US Navy, Yamaha, Swedish Rail, the Swedish Army and National Power, Swedish Forest industry, the Commercial Fishing Navy and the University of Stuttgart and now we too.


To Top